Article 3- Escalator and Moving Walk Standard References

The Standard References Used to Create EN 115-1:2017

The final version of the escalator and moving walks standard is EN 115-1:2017 which was approved by the Technical Committee CEN/TC10 and superseded EN 115-1:2008+A1:2010.

The below standards are the essential references used by CEN, in part and in whole, for the EN 115-1:2017 escalator and moving walk standard:

1. EN 1929-2:2004, Basket trolleys — Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors
2. EN 1929-4:2005, Basket trolleys — Part 4: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors
3. EN 1990:2002, Eurocode — Basis of structural design
   This standard is currently impacted by the amendment EN 1990:2002/A1:2005.
4. EN 1993-1-1:2005, Eurocode 3: Design of steel structures — Part 1-1: General rules and rules for buildings
5. EN 1998-1:2004, Eurocode 8: Design of structures for earthquake resistance — Part 1: General rules, seismic actions and rules for buildings
6. EN 10025-1:2004, Hot rolled products of structural steels — Part 1: General technical delivery conditions
7. EN 10025-2:2004, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy structural steels
8. EN 10025-3:2004, Hot rolled products of structural steels — Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
9. EN 10025-4:2004, Hot rolled products of structural steels — Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
10. EN 10025-5:2004, Hot rolled products of structural steels — Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
11. EN 10025-6:2004+A1:2009, Hot rolled products of structural steels — Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
12. EN 10083-1:2006, Steels for quenching and tempering — Part 1: General technical delivery conditions 2)
13. BS EN 115-1:2017
14. EN 10083-2:2006, Steels for quenching and tempering — Part 2: Technical delivery conditions for non-alloy steels
15. EN 10083-3:2006, Steels for quenching and tempering — Part 3: Technical delivery conditions for alloy steels
16. EN 12015:2014, Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Emission
17. EN 12016:2013, Electromagnetic compatibility — Product family standard for lifts, escalators and moving walks — Immunity
18. EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements — Part 1: Classification using data from reaction to fire tests
19. EN 60068-2-6:2008, Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:2007)
20. EN 60068-2-14:2009, Environmental testing — Part 2-14: Tests — Test N: Change of temperature (IEC 60068-2-14:2009)
21. EN 60068-2-27:2009, Environmental testing — Part 2-27: Tests — Test Ea and guidance: Shock (IEC 60068-2-27:2008)
22. EN 60204-1:2006, Safety of machinery — Electrical equipment of machines — Part 1: General
23. requirements (IEC 60204-1:2006, modified)
24. EN 60529:1991, Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989)
25. EN 60664-1:2007, Insulation coordination for equipment within low-voltage systems — Part 1: Principles, requirements and tests (IEC 60664-1:2007)
26. EN 60947-4-1:2010, Low-voltage switchgear and controlgear — Part 4-1: Contactors and motorstarters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009)
    This standard is currently impacted by the amendment EN 60947-4-1:2010/A1:2012.
27. EN 60947-5-1:2004, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices (IEC 60947-5-1:2004)
    This standard is currently impacted by the amendment EN 60947-5-1:2004/A1:2009.
28. EN 61249 (all parts), Materials for printed boards and other interconnecting structures (IEC 61249, all parts)
29. EN 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005)
30. This standard is currently impacted by the amendment EN 62061:2005/A1:2013.
31. EN 62326-1:2002, Printed boards — Part 1: Generic specification (IEC 62326-1:2002)
32. EN ISO 868:2003, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
33. EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010)
34. EN ISO 13850:2015, Safety of machinery — Emergency stop function — Principles for design (ISO 13850:2015)
35. EN ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
36. ISO 3864-1:2011, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings
37. ISO 3864-3:2012, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
38. HD 60364-4-41:2007, Low-voltage electrical installations — Part 4-41: Protection for safety —
39. Protection against electric shock