Get Online Escalator Drawings

In this section, you can get customized escalator drawings based on your project specifications. You will need to enter the following variables:

• Height: Height is the difference between two building floor levels which is calculated from the finished surface level of the lower floor to the finished surface level of the upper floor.
• Angle: Escalator angle can be either 30 or 35 degrees. Obviously, the 35-degree escalators need less horizontal length compared to the 30-degree. Please note that according to standards, for heights of more than 6 meters, only the 30-degree angle can be selected.
• Step Width: Escalator steps are made in three widths: 600 mm, 800 mm, or 1000 mm. You can choose either of the widths considering project utilization and requirements.
• Floor Thickness (FT): Floor thickness is defined as the thickness of the upper floor.

In the next step, you will need to fill the contact information form.

NOTE: The items indicated with * are mandatory to fill.