Standard for Escalators and Moving Walks ( EN-115)
The Standard defines safety requirements for escalators and moving walks. It also covers all major hazards, dangers, misuse and situations related to the above-mentioned. The objective is to safeguard people/objects against risks of accidents during installation, operation, maintenance & inspection work. This standard is not applied to escalators and moving walks which were manufactured before the date of the document's publication. Also, the standard recommends all existing installed escalators conform to this standard.
The European Commission and the European Free Trade Association supported the essential requirements of EU Directives and instructed CEN to create the new version of the Standard.
The final version of the standard is EN 115-1:2017, which was approved by the Technical Committee CEN/TC 10, and superseded EN 115-1:2008+A1:2010. And this version became a national standard by January 2018. The committee is a secretariat of AFNOR for Lifts, escalators and moving walks and created the replacement standard due to a number of safety and upgrade issues in the previous document. They withdrew all other conflicting standards by January 2019.
The EN 115 “Safety of escalators and moving walks” consists of the following parts:
part1: Construction and installation.
part2: Regulations for the improvement of safety in escalators and moving walks.
part3: The association of the EN 115:1995, its amendments and EN 115-1:2008 (Technical Report).
part4: Interpretation of the EN 115 family of standards or related (Technical Specification).
Countries that are bound to implement the EN-115 standard are Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Area of Influence
This documents is type-C standard and it is related to machine manufacturers (small, medium, and large enterprises) and health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.). Also, the safety requirements of Escalators and Moving Walks influences others such as machine users/employers (small, medium and large enterprises), machine users/employees (e.g. trade unions, organizations for people with special needs), service providers (small, medium and large enterprises), as well as consumers.
The requisites of the type-C standard take precedence over all other requirements of other (Types A and B) standards for machines.
Users with Physical Disabilities
The standard assumes that healthy people will be using Escalators and Moving Walks. It assumes that there are populations with disabilities who might make use of these products, facilities and the environment. Use depends on the scope of their disabilities. Do not use wheelchairs on Escalators and Moving Walks because of the existing dangers.
The standard recommends people with disabilities, in wheelchairs or with guide dogs use elevators. Projects should install signs close to Escalators and Moving Walks to indicate the location of elevators. Building designers/owners must include measures to minimize dangers, hazards and risk to an acceptable level at the building design stage, according to the ISO 14798 methodology.
EN-115 assumes negotiations take place between the customer and the supplier or installer for each contract to evaluate intended use of the escalator or moving walk, environmental conditions, civil engineering issues, as well as other requirements related to site of installation.
It is the responsibility of the building designer or owner to plan traffic flows for evacuation and rescue purposes.
Based on utilization or installation environment, for operation under special conditions of exposure to weather (fully out-door/semi out-door), explosive atmosphere or as emergency exit, the design, components, materials, options and instructions for use must be according to the existing conditions.
To clarify any issues related to the standard which are unclear or unidentified, Contact the Interpretation Committee, which supervises the Technical Committee CEN/TC 1.
How do you rate this article?
Please Wait ...
It May Take a Few Minutes
Sign In To Your Personal Account